Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.6845754
- Product Categories
- Friendly Links
Information Name: | Supply HY-10 self-leveling mortar |
Published: | 2012-03-13 |
Validity: | 30 |
Specifications: | HY |
Quantity: | 0.00 |
Price Description: | 1,200 yuan / ton |
Detailed Product Description: | Brief description Product Category: Construction adhesive series Product Name: HY-10 self-leveling mortar Product Code: HY-10 Customer Rating: Price: 1200 RMB Description: Recommended for the preparation of paving flooring, carpets, PVC flooring and other substrates leveling rubber processing. Packing: 25 kg / bag Parameters Details Uses: Recommended for wood floors for tiling, carpets, PVC flooring and other substrates leveling rubber processing. As well as leveling epoxy coating requirements or the requirements of the base, or other requirements of the ground dust. Such as: residential, office buildings, hospitals, shopping malls and other ground. Construction Description: (A) Primary treatment: 1, before the construction of grass-roots strength of concrete to be ≥ C20, rugged areas, cracks and holes should be pre-treatment level, and then The scattered debris of the base surface cleaned, the surface must remain hard, smooth and clean. 2, the primary water wet concrete surface and to ensure that no adhesion layer before pouring the water. 3, ordinary Portland cement in the construction of new concrete base to be self-leveling 21 days after construction, the construction of the new sulphoaluminate cement concrete base Layer should be carried out 7 days after the completion of self-leveling construction. (B) mixing HY-10 1, small area or road construction, the available small electric mixer (200 ~ 500 r / min), in the bucket for mixing, stirring each one Full time and materials required; large area construction, the available high-speed mixer mixing, method of construction with mortar pump. 2, the amount of water into the bucket, open the mixer while stirring slowly add a packet of HY-10 (plus the best finish in 1 minute), stir 4 to 5 minutes, still about 1 minute, stir again to No corporation can even paste. If the enhancement solution by HY-10 complex to use, just follow the HY-10 enhancement solution: HY-10 self-leveling mortar mixing ratio = 1:3-4 evenly, can be appropriately diluted with water to adjust consistency. 3, cold conditions, to use warm water (not exceeding 40 ℃) stirring. Mortar to keep the temperature above 5 ℃. (C) Pouring and leveling: 1, the stirred HY-10 poured, spread evenly, with a special tooth scraper control the thickness of mouth, the thickness of the product construction of ≥ 3mm, a Time construction of the thickness 3 ~ 30mm, reference to the amount 1.6kg / m / mm. 2, the construction workers can be put into the construction of the ground spikes, with the tooth surface mouth scraper Calibrating the mortar to remove the link at the dump, and grievance Maintain the desired thickness. 3, with a deflated gently rolling drum to eliminate air bubbles generated when mixing. 4, good mixing HY-10 should be used within 35 minutes. (D) Maintenance: The usual mortar under normal temperature conditions for conservation, high or low temperatures shall be taken after the initial hardening of the wet sacks watering or covering, mats and other measures to conserve 1 to 3 days. Traffic ground to be severe after 3 days before the conservation movement. Specifications: Conforms to standard specifications JC/T985-2005 Test Test Results If test items of test results technical indicators (C40F4) Fluidity / mm initial fluidity 131 ≥ 130 20min fluidity 136 ≥ 130 Tensile bond strength / Mpa 1.1 ≥ 1.0 Size change rate /% -0.04-0.15-+0.15 24h compressive strength / Mpa 6.1 ≥ 6.0 24h bending strength / Mpa 2.0 ≥ 2.0 28d compressive strength / Mpa 43.4 ≥ 40 28d bending strength / Mpa 5.7 ≥ 4 Packaging and storage: 1, at 5 ℃ ~ 35 ℃ ventilated and dry warehouse storage, unopened shelf life of 6 months. 2, Packing 25kg / bag. Contact; Han Fuli phone; |
Admin>>>
You are the 11161 visitor
Copyright © GuangDong ICP No. 10089450, Jinxi Hongyun Industry Co., Ltd. Beijing All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 11161 visitor
Copyright © GuangDong ICP No. 10089450, Jinxi Hongyun Industry Co., Ltd. Beijing All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility